Ammco 95000140 1450 Brake Washer Filter Replacement User Manual

Browse online or download User Manual for Equipment Ammco 95000140 1450 Brake Washer Filter Replacement. AMMCO 95000140 1450 Brake Washer Filter Replacement User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Instructions
1. Disconnect air supply.
2. Undo hose connection at pump from filter by sliding
the locking tab.
3. Remove pan assembly from barrel by loosening the
metal ring.
4. Unscrew suction strainer from bottom of the pick-up
hose that is in the tank and save the strainer.
5. Remove filter and attached hoses from the tank held
by two screws.
6. Drill three new holes required to mount new filter, if
required. See figure 1.
7. Press provided plugs into the old mounting holes.
8. Assemble new filter to tank using the provided 1-
inch screws.
9. Place filter cartridge in filter.
10. Assemble new threaded fitting to the end of the 28-
inch pick-up hose provided. Apply hose clamp.
11. Screw stainer from step 4 on to the fitting.
12. With stainer in tank, route other hose end through
the 3/4-inch hole in the barrel.
13. Push tube and clamp on to the “ in” side of filter.
Tighten hose clamp.
14. Re-install pan assembly.
15. Push new 13-inch tube onto the new pump connec-
tor provided; then into “ in” side of pump. Slide
locking tab to retain connector. Tighten clamp.
16. Push other end of 13-inch tube into “ out” side of fil-
ter. Tighten clamp.
17. Connect air supply to washer.
Note: If the washer does not pump water, one or more
of the new connections are not tight. Make sure all of the
clamps are tight and that the filter canister is tight.
1450 Brake Washer Filter Replacement
Kit 95000140 Instructions
AMMCO, Inc. • Hennessy Industries • 1601 J.P. Hennessy Drive, LaVergne, TN 37086-3565
(800) 688-6359 • (615) 641-7533 • (615) 641-5104 FAX • www.ammcoats.com
95000139 01 03/11 © COPYRIGHT 2008 HENNESSY INDUSTRIES AND AMMCO ALL RIGHTS RESERVED PRINTED IN U.S.A.
Figure 1 - Drill Three Holes
.25
2.25
4.00
ø .75
Seam
ø .281
(2) Holes
Page view 0
1

Summary of Contents

Page 1 - Kit 95000140 Instructions

Instructions1. Disconnect air supply.2. Undo hose connection at pump from filter by slidingthe locking tab.3. Remove pan assembly from barrel by loose

Comments to this Manuals

No comments